1 set / 2 pieces Eibach Pro-Spacer Track plates, wheel spacers , Spacer for:
Dodge Caliber from year 06.2006
for widening an axle by 30mm
Version: Track plates for bolting. The wheel is screwed in as usual by means of lug nuts.
Track plates (also called wheel spacers, adapter discs, spacers or spacers) ensure a more sporty appearance and improved handling thanks to the larger track width > Our track plates are made of a super-light aluminum alloy, to protect against corrosion, they are provided with a high-strength special coating.
with TÜV certificate
Wheel spacers per axle: 30mm
maximum offset ( ET): 14mm
Bolt circle: 114,3 / 5
Notes:
When using the spacers, make sure that the rims used have suitable pouring pockets / recesses for receiving the projecting original wheel bolt, since without these recesses, a mounting of the rims or use of the spacers is not possible. Please pay particular attention to the protruding length of the original stud. (Example: stud length 25mm - disc width 15mm u003d protrusion of the original stud so the depth of the recess should be at least 11mm and the height / width of the recess must be at least 22mm to accommodate the protruding stud nut.) It is also allowed to have protruding studs Shorten the wheel bolt accordingly with a saw. ATTENTION: with 15 mm discs, a recess of at least 5 mm depth is always necessary, as the screw-on nuts protrude beyond the disc contact surface!
Can not be mounted when using steel wheels!
SPV 9141500216