40mm track widening Dodge Caliber , from year 06.2006

1 set/2 pieces of the "a href='http://performance-suspension.eibach.de/en/products/street_performance/wheel_spacers' target='_blank'>Eibach Pro-Spacer track plates, track extensions, spacer for:
Dodge Caliber from year 06.2006
for widening an axis by 40mm

version: Track plates for screwing. The fastening is done by means of special nuts (which is supplied), the wheel is screwed as usual by means of wheel nuts.

track plates (also called track widenings, adapter discs, spacer or spacer) provide a sportier look and improved handling due to the enlarged track gauge.
Our track plates are made of a super-light aluminium alloy, they are provided with a high-strength special coating to protect against corrosion .

with TÜV
width per axle: 40mm
maximum press-fit depth (ET): 14mm
hole circle: 114.3/5

Notes:
When using the spacer, care must be taken to ensure that the rims used have suitable casting pockets / recesses for receiving the remaining original wheel bolts, as the rims cannot be fitted without these recesses. Please pay particular attention to the protruding length of the original standing bolt. (Example: Standing bolt length 25mm - disc width 15mm = supernado of the original bolt. So the depth of the recess should be at least 11mm. Furthermore, the height/width of the recess must be at least 22mm in order to accommodate the protruding screw-on nut.) Furthermore, it is allowed to shorten protruding wheel bolts with a saw accordingly. ATTENTION: with 15 mm discs, a recess of at least 5 mm depth is always necessary, as the screw-on nuts survive over the disc surface!
Cannot mountable when using steel rims!