Main page » Other Vehicles » Mitsubishi » Pajero » 50mm wheel spacers Mitsubishi Pajero, from year 11.1998
50mm wheel spacers Mitsubishi Pajero, from year 11.1998
1 set / 2 piecesEibach Pro SpacerTrack plates, wheel spacers , Spacer for:
Mitsubishi Pajero from construction year 11.1998
for widening an axle by 50mm
Version: Track plates for bolting. Fastening is done by special nuts (provided), the wheel is screwed on with wheel nuts as usual.
Centering is via the wheel bolts, so balancing on the vehicle may be necessary.
Track plates (also called wheel spacers, adapter discs, spacers or spacers) provide a wider look and feel for a sportier look and ride.
Our track plates are made from a superlight aluminum alloy to protect against corrosion equipped with a high-strength special coating.
with TÜV certificate
Wheel spacers per axle: 50mm
maximum offset (ET): -20mm
Bolt circle: 139,7 / 6
Notes:
When using the spacers, it is important to ensure that the rims used have suitable pouring pockets / recesses for receiving the protruding original wheel bolts, because without these recesses a shoring the rims or use of the spacers is not possible. Please pay particular attention to the protruding length of the original stud bolt. (Example: stud length 25mm - disc width 15mm = supernatant of the original stud so the depth of the notch should be at least 11mm and the height / width of the notch must be at least 22mm to accommodate the protruding stud nut It is also allowed to shorten protruding wheel bolts with a saw. ATTENTION: with 15 mm discs, a recess of at least 5 mm depth is always necessary, as the screw-on nuts protrude beyond the disc contact surface!
The centering of the rim is only possible with the wheel bolts! It may therefore be necessary to balance the wheels on the vehicle in order to avoid possible vibrations.
SPV 918250043