1 set / 2 pieces Eibach Pro-Spacer Track plates, wheel spacers , Spacer for:
Mitsubishi Outlander from construction year 05.2003
for widening an axle by 50mm
Version: Track plates for bolting. The wheel is screwed in as usual by means of lug nuts.
Track plates (also called wheel spacers, adapter discs, spacers or spacers) ensure a more sporty appearance and improved handling thanks to the larger track width > Our track plates are made of a super-light aluminum alloy, to protect against corrosion, they are provided with a high-strength special coating.
with TÜV certificate
Wheel spacers per axle: 50mm
maximum offset ( ET): 31mm
Bolt Circle: 114,3 / 5
Notes:
When using the spacer, make sure that the rims, when using the 15mm spacer at least deep and Gießaschen / have recesses, in the spacer, at least 9mm! (When using the 25mm spacer at least 4mm!). If this is not the case, the original wheel bolts in the wheel carrier must be replaced with shorter bolts (System 5, 6). Otherwise it is not possible to use the spacers.
When using the spacers, it must be ensured that the rims used have suitable pouring pockets / recesses for receiving the protruding original wheel bolts, as without these recesses it is not possible to install the rims or use the spacers. Please pay particular attention to the protruding length of the original stud. (Example: stud length 25mm - disc width 15mm u003d protrusion of the original stud so the depth of the recess should be at least 11mm and the height / width of the recess must be at least 22mm to accommodate the protruding stud.) It is also allowed to have protruding studs Shorten the wheel bolt accordingly with a saw. ATTENTION: with 15 mm discs, a recess of at least 5 mm depth is always necessary, as the screw-on nuts protrude beyond the disc contact surface!
SPV 9142501614