54mm wheel spacer Jeep Wrangler JK from 2007 onwards

1 set / 2 piecesEibach Pro-SpacerTrack plates, wheel spacers , Spacer for:
Jeep Wrangler JK from year of construction 2007
for widening an axle by 54mm

Version: Track plates for bolting. It is fastened using special nuts (provided), and the wheel is screwed in as usual using lug nuts.

Track plates (also called wheel spacers, adapter discs, spacers or spacers) ensure a more sporty look and improved performance thanks to the increased track width Driving behavior.
Our track plates are made from a super-lightweight aluminum alloy, with a high-strength special coating to protect against corrosion.

with TÜV certificate
Wheel spacers per axle: 54mm
maximum offset (ET): 14,5mm
Bolt circle: 127/5

Notes:
When using the spacers, it is important to ensure that the rims used have a suitable diameter Have pockets / recesses for receiving the protruding original wheel bolts, because without these recesses, it is not possible to install the rims or use the spacers. Please pay particular attention to the protruding length of the original stud bolt. (Example: stud length 25mm - disc width 15mm = supernatant of the original stud so the depth of the notch should be at least 11mm and the height / width of the notch must be at least 22mm to accommodate the protruding stud nut It is also allowed to shorten protruding wheel bolts with a saw. ATTENTION: with 15 mm discs, a recess of at least 5 mm depth is always necessary, as the screw-on nuts protrude beyond the disc contact surface!
Can not be mounted when using steel wheels!