60mm wheel spacer Dodge Nitro, from year 06.2007

1 set / 2 piecesEibach Pro-SpacerTrack plates, wheel spacers , Spacer for:
Dodge Nitro from year 06.2007
for widening an axle by 60mm

Version: Track plates for bolting. It is fastened using special nuts (provided), and the wheel is screwed in as usual using lug nuts.

Track plates (also called wheel spacers, adapter discs, spacers or spacers) ensure a more sporty look and improved performance due to the increased track width Driving behavior.
Our track plates are made from a super-light aluminum alloy, with a high-strength special coating to protect against corrosion.

with TÜV certificate
Wheel spacers per axle: 60mm
maximum offset (ET): 10,5mm
Bolt circle: 114,3 / 5

Notes:
When using the spacers, make sure that the rims used Have suitable pouring pockets / recesses for receiving the protruding original wheel bolts, as without these recesses, a mounting of the rims or use of spacers is not possible. Please pay particular attention to the protruding length of the original stud bolt. (Example: stud length 25mm - disc width 15mm = supernatant of the original stud so the depth of the notch should be at least 11mm and the height / width of the notch must be at least 22mm to accommodate the protruding stud nut It is also allowed to shorten protruding wheel bolts with a saw. ATTENTION: with 15 mm discs, a recess of at least 5 mm depth is always necessary, as the screw-on nuts protrude beyond the disc contact surface!
Body work in the inner fender necessary!