60mm wheel spacer Nissan Pick Up MD22, from year 02.1998

1 set / 2 piecesEibach Pro-SpacerTrack plates, wheel spacers , Spacer for:
Nissan Pick Up from year 02.1998
for widening an axle by 60mm

Version: Track plates for screwing on. Fastening is done by special nuts (provided), the wheel is screwed on with wheel nuts as usual.
Centering is via the wheel bolts, which may require balancing on the vehicle.

Track plates (also called wheel spacers, adapter discs, spacers or spacers) provide a wider track for a sportier look and improved handling .
Our track plates are made of a superlight aluminum alloy, to protect against corrosion they are provided with a high-strength special coating.

with TÜV certificate
Wheel spacers per axle: 60mm< br>maximum offset (ET): 0mm
Bolt Circle: 139,7 / 6

Notes:
When using the spacers, make sure that the rims you use have adequate casting Pockets / recesses for receiving the protruding original wheel bolts, as without these recesses, a mounting of the rims or use of spacers is not possible. Please pay particular attention to the protruding length of the original stud bolt. (Example: stud length 25mm - disc width 15mm = supernatant of the original stud so the depth of the notch should be at least 11mm and the height / width of the notch must be at least 22mm to accommodate the protruding stud nut It is also allowed to shorten protruding wheel bolts with a saw. ATTENTION: with 15 mm discs, a recess of at least 5 mm depth is always necessary, as the screw-on nuts protrude beyond the disc contact surface!
The centering of the rim is only possible with the wheel bolts! It may therefore be necessary to balance the wheels on the vehicle in order to avoid possible vibrations.