1 set / 2 pieces Eibach Pro-Spacer Track plates, wheel spacers , Spacer for:
Toyota Landcruiser Year 01.1990-12.1997
for widening an axle by 60mm
Version: Track plates for bolting. Fastening is done by special nuts (provided), the wheel is screwed on with wheel nuts as usual.
Centering is via the wheel bolts, so balancing on the vehicle may be necessary.
Track plates (also called wheel spacers, adapter disks, spacers or spacers) ensure a sportier look and improved handling due to the increased track width Our track plates are made of a super-light aluminum alloy, to protect against corrosion, they are provided with a high-strength special coating.
with TÜV certificate
Wheel spacers per axle: 60mm
maximum offset (ET ): -30mm
Bolt Circle: 139,7 / 6
Notes:
When using the spacers, make sure that the rims used have suitable pouring pockets / recesses to accommodate the projecting original wheel bolt, since without these recesses, a mounting of the rims or use of the spacers is not possible. Please pay particular attention to the protruding length of the original stud. (Example: stud length 25mm - disc width 15mm u003d protrusion of the original stud so the depth of the recess should be at least 11mm and the height / width of the recess must be at least 22mm to accommodate the protruding stud.) It is also allowed to have protruding studs Shorten the wheel bolt accordingly with a saw. ATTENTION: with 15 mm discs, a recess of at least 5 mm depth is always necessary, as the screw-on nuts protrude beyond the disc contact surface!
The centering of the rim is only possible with the wheel bolts! Under certain circumstances, a balancing of the wheels on the vehicle may be necessary to avoid any vibrations that may occur.
SPV 9183000210