60mm wheel spacers Mitsubishi Pajero, from year 11.1998

1 set/2 pieces of the "a href='http://performance-suspension.eibach.de/en/products/street_performance/wheel_spacers' target='_blank'>Eibach Pro-Spacer track plates, track extensions, spacer for:
Mitsubishi Pajero from year 11.1998
for widening an axis by 60mm

Version: Track plates for screwing on. The fastening is done by means of special nuts (which is supplied), the wheel is screwed as usual with wheel nuts.
center is done via the wheel bolts, so balancing on the vehicle may be required.

track plates (also called track widenings, adapter discs, spacer or spacer) provide a sportier look and improved handling due to the enlarged track gauge.
Our track plates are made of a super-light aluminium alloy, they are provided with a high-strength special coating to protect against corrosion .

with TÜV
width per axle: 60mm
maximum press-fit depth (ET): -20mm
hole circle: 139,7/6

Notes:
When using the spacer, care must be taken to ensure that the rims used have suitable casting pockets / recesses for receiving the outstanding original wheel bolts, as without these recesses it is not possible to use the rims or the spacer. Please pay particular attention to the protruding length of the original standing bolt. (Example: Standing bolt length 25mm - disc width 15mm = supernado of the original bolt. So the depth of the recess should be at least 11mm. Furthermore, the height/width of the recess must be at least 22mm in order to accommodate the protruding screw-on nut.) Furthermore, it is allowed to shorten protruding wheel bolts with a saw accordingly. ATTENTION: with 15 mm discs, a recess of at least 5 mm depth is always necessary, as the screw-on nuts survive over the disc surface!
The centering of the rim is only possible via the wheel screws! Therefore, it may be necessary to balance the wheels on the vehicle in order to avoid any vibrations that may occur.